Numerous Windows clients griped that they experience this system blunder “Windows has identified an IP address struggle”. In detail, the mistake told that another PC on the system has a similar IP address as this PC. Be that as it may, the mistake could even happen when there’s simply just a single PC utilizing the system. As a matter of fact this is a mistake with your PC settings and the switch. In this post, you’ll learn three simple and viable approaches to fix the blunder.
How to Fix an IP Address Conflict
Follow the methods below if you want to solve IP address Conflict error on your Windows OS. The reason why you are facing this problem is because someone on other system is using the same IP to use the Internet and that is why it is showing you this error
Method 1: Release and recharge your IP address
1) Type cmd in the hunt box from the Start menu. At that point right-click Command Prompt from the top outcome and pick Run as overseer.
2) Click Yes when provoked by User Account Control.
3) On the spring up window, type the accompanying directions and hit Enter after each.
Presently check whether the blunder still exists.
Method 2: Restart your switch
For certain reasons, your switch may neglect to appoint fitting IP address to your PC. At that point the blunder “Windows has distinguished an IP address struggle” could occur. In such case, attempt to restart your switch to fix it.
Press the power catch of your switch to control off, at that point hang tight for some time and press the power catch again to begin it once more.
Method 3: Remove your static IP
1) On your console, hold down the Windows logo key , then press R button to raise the Run box.
2) Type ncpa.cpl in the case and hit Enter to open Network Connections.
3) Right-click on your Network Connection and pick Properties.
4) Double-click on Internet Protocol Version 4(TCP/IPv4). At that point tick on Obtain an IP address consequently and Obtain DNS server address naturally.
Snap OK and close every one of the windows.
5) Restart your PC and check whether the mistake has been unraveled.
Method 4: Update your accessible drivers
This mistake may likewise be brought about by an old or inaccurate system card driver. You can refresh your driver physically or, in case you’re not sure playing around with drivers, you can do it naturally with Driver Easy.
Driver Easy will thus see your structure and find the correct drivers for it. You don’t need to know decisively what system your PC is running, you don’t need to risk downloading and presenting the wrong driver, and you don’t need to worry over submitting a blunder while presenting.
You can revive your drivers normally with either the FREE or the Pro type of Driver Easy. In any case, with the Pro form all that’s needed is 2 ticks (and you get full help and a 30-day unconditional promise):
1) Download and introduce Driver Easy.
2) Run Driver Easy and click the Scan Now catch. Driver Easy will by then channel your PC and distinguish any issue drivers.
3) Click the Update catch alongside a hailed system card driver to naturally download and introduce the right form of this driver (you can do this with the FREE form).
Or on the other hand click Update All to consequently download and introduce the right form of the considerable number of drivers that are absent or outdated on your framework (this requires the Pro form – you’ll be provoked to redesign when you click Update All).
4) Restart your PC.
It’s just as simple as that.
Also Read: How to Block Chrome Software Report Tool
That’s it, this is how you can fix up IP address conflict in your Windows operating system. We have personally tried all the solutions mentioned above and all of them has worked for us. If you face any difficulties then please let us know in comment section below.